Lubricate the belt:
It’s important to take good care of your treadmill deck (the walking surface underneath the belt), because the belt/deck friction may affect the function and life of your treadmill and requires periodic lubrication.
- Provided with the treadmill is a small sample bottle of lubrication oil. Use this for the initial lubrication. Thereafter you may use Silicone spray which is available from your local hardware or Auto Shop. Ensure that the Silicone spray purchased is a multi-purpose enhancer, lubricant and protectant.
- Insert the straw-like spray valve in the spray head of the lubricant container.
- Lift the belt at one side and hold the spray valve at a distance to the front end of walking belt and deck. Start at the front end of the belt. Lean the spray valve towards the rear. Repeat this process on the other side of the belt. Spray each side for about 4 seconds.
- Wait 1 minute to let the silicon spray spread, before starting the machine.
As walking belts tend to stretch slightly with use, the belt may occasionally need to be tightened. If the belt is too loose, you may find the belt stops during use, while the motor continues to run.
Cleaning:
General cleaning of your treadmill will prolong its life and improve its performance. Keep the unit clean by dusting regularly. Be sure to dust the exposed part of the deck on either side of the walking belt and also the side rails.
Other Maintenance:
If for any reason you notice your machine is not performing the way it should, please check your Manual booklet provided with the machine. In there you will find troubleshooting information that can help fix issues. If you have followed this instructions and need additional help, or would like to chat about other maintenance to your machine, please call our Customer Service team on 1300 13 55 96 or can guide you through the process or arrange a service technician to your home.
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING, LUBRICATING OR SERVICING THE UNIT.